| Tuners - GroverROTOMATICS®
WITH 18:1 GEAR RATIO (102-18 SERIES)
The original Rotomatic® with an improved higher ratio gearing. The 18:1
ratio provides for finer tuning and greater stability. The finer gears
provide smoother tuning and a higher degree of backlash elimination | | |
| Finger Board - RosewoodThe
most common fretboard, Rosewood is naturally oily, and works well for
any surface that sees frequent human contact. The sound is richer in
fundamental than Maple because the stray overtones are absorbed into the
oily pores. | | |
| Pickups - Duncan Designed HB-102b/HB-101nBridge:
The HB-102 was modeled after Seymour Duncan's USA-made SH-4 JB™ bridge.
Like the HB-101s, this pickup also use Alnico 5 magnets, but have a
hotter winding spec, based on the world's most popular "hot-rodded"
humbucker. The bridge pickup is Trembucker-spaced. Neck: The HB-101 was
patterned after the Seymour Duncan SH-1 '59 Model™ humbucker set. It
uses an Alnico 5 magnet and winding spec based on the revered 1955 -
1960 P.A.F. | | |
| Neck -3-pc MapleMade
with 3 pieces of maple for extra stability. 3 piece necks can withstand
the test of time. Where standard necks may show aging defects from
temperature and moisture changes throughout the years, the 3 piece neck
will stay nice and straight for a lifetime of playability. | | | | Construction: | Set Neck w/ Ultra Access | | Available Bodies: | - Mahogany
- Mahogany w/Flamed Maple | | Neck: | 3-pc Maple | | Finger Board: | Rosewood | | Frets: | 24 Medium | | Inlay: | Dots | | Bindings: | Crème | | Tuners: | Grover | | Pickups: | Duncan Designed HB-102b/HB-101n | | Electronics: | Vol/Vol/Tone (tap)/3 Way Switch | | Available Bridges: | - TonePros TOM w/Thru-Body | | Scale: | 24.75" | | Hardware: | Chrome | | Available Colors: | - Black Cherry (BCH)
- Dark Brown Sunburst (DBSB)
- Dark Metallic Blue (DMB)
- Gloss Black (BLK) | | Available Cases: |  | SGR-1C | | | SGR-UNIV/1 (LEFTY) |
| | Available Lefty: | Yes | |
Reviews
|
|
Electric Guitars